Home Product Catalog How to Order (Advertising only) Contact Me My Account

Photocopies are not acceptable.
Art format: EPS or Vector drawn.

The cost to clean up or change art is $30.00/hour (- � hour min).
First Art proofs is Free - $12.00 each aditional proofs.
We reserve the right to determine what is acceptable artwork.
Please submit artwork for your order(s) to sandy@southwindonline.com

Screen Printing:
an image is transferred to the printed surface by ink, which is pressed through a stenciled
    screen and treated with a light-sensitive emulsion. Film positives are put in contact with the screens and
    exposed to light, hardening the emulsion not covered by film and leaving a soft area on the screen for the
    squeegee to press ink through. (Also called silk screening)

Pad Printing: a recessed surface is covered with ink. The plate is wiped clean, leaving ink in the recessed
    areas. A silicone pad is then pressed against the plate, pulling the ink out of the recesses, and pressing it
    directly onto the product.

4-color Process: a system where a color image is separated into 4 different color values by the use of
    filters and screens (usually done digitally). The result is a color separation of 4 images, that when
    transferred to printing plates and printed on a printing press with the colored inks cyan (blue), magenta (red),
    yellow and black, reproduces the original color image. These four colors can be combined to create
    thousands of colors.

Pantone Matching System (PMS): a book of standardized color in a fan format used to identify, match and
    communicate colors in order to produce accurate color matches in printing. Each color has a coded number
    indicating instructions for mixing inks to achieve that color.

Camera-ready: artwork that is black and white and has very clean, crisp lines that make it easy to scan and
    suitable for photographic reproduction.

Bleeds: printers cannot print right to the edge of a paper sheet. To create that effect, the printer must use a
    sheet, which is larger than the document size. Then the printer prints beyond the edge of the document size
    (usually 1/8?), then cuts the paper down to the document size.

Imprint Area: the area on a product, with specific dimensions, in which the imprint is placed.
Paper proof: Impression of type or artwork on paper so the correctness and quality of the material to be
    printed can be checked. The least expensive is a regular black and white faxed paper proof.

Pre-production Proof: an actual physical sample of the product itself produced and sent for approval before
    an order goes into production.

Drop Shipment: an order shipped to more than one location will be charged a fee for each additional destination.
Less than Minimum: the fee charged by a supplier for ordering 50% fewer items than the quantity listed in the
    minimum or first column. This option is not always available on all products.

EQP (End Quantity Pricing): the price listed in the far right column of a product?s catalog listing. This best price,
    based on large quantities, is often granted to a distributor who is a large customer of a particular supplier.
    Exact Rerun: usually there is no set-up charge on exact reruns of an order.

Etching: using a process in which an image is first covered with a protective coating that resists acid, then
    exposed, leaving bare metal and protected metal. The acid attacks only the exposed metal, leaving the image
    etched onto the surface.

Engraving: cutting an image into metal, wood or glass by one of three methods--computerized engraving,
    hand tracing, or hand engraving.

Colorfill: screen printing an image and then debossing it onto the vinyl?s surface
Embroidery: stitching a design into fabric through the use of high-speed,
    computer-controlled sewing machines. Artwork must first be "digitized," which is the specialized process of
    converting two-dimensional artwork into stitches or thread. A particular format of art such as a jpeg, tif, eps,
    or bmp, cannot be converted into an embroidery tape. The digitizer must actually recreate the artwork using
    stitches. Then it programs the sewing machine to sew a specific design, in a specific color, with a specific
    type of stitch. This is the process known as digitizing.

Debossing: depressing an image into a material?s surface so that the image sits below the product surface
Embossing: impressing an image in relief to achieve a raised surface
Hot Stamp: setting a design on a relief die, which is then heated and pressed onto the printing surface
Laser or Foil Stamp: applying metallic or colored foil imprints to vinyl, leather or paper surfaces
Personalization: imprinting an item with a person's name using one of several methods such as mechanical
    engraving, laser engraving, hot stamping, debossing, sublimation, or screen printing, to name a few.

Die-casting: injecting molten metal into the cavity of a carved die (a mold)
Die-striking: producing emblems and other flat promotional products by striking a blank metal sheet with a
    hammer that holds the die